20,000 Layers Poultry House Design for a 73 × 10 m Building


2026-11-20

This 20,000 layers poultry house design uses a 73 × 10 × 3.5 m house with 159 sets of four-tier H-type layer cages. Three parallel rows of 53 sets each form cage runs of 63.60 m. The layout reserves 3.30 m at the front and 1.85 m at the rear for automatic feeding, egg collection, and manure removal equipment.

20,000 hensTarget flock size
3 rows × 53 setsCage arrangement
22,896 hensRated cage capacity

What cage specifications are used in this design?

The design uses 1,200 × 625 × 480 mm four-tier H-type layer cages rated for 144 laying hens per set. Stacking the cages across four tiers accommodates the target flock in three rows while retaining aisles for inspection and daily work.

Design itemSpecification
Poultry house dimensions73 × 10 × 3.5 m
Target flock size20,000 laying hens
Cage typeFour-tier H-type layer cage
Cage dimensions1,200 × 625 × 480 mm
Rated capacity per set144 hens
Cage arrangement3 rows × 53 sets
Total cage sets159
Cage run per row63.60 m
Total rated cage capacity22,896 hens

How are 159 cage sets arranged in a 73-meter house?

In this 20,000 layers poultry house design, each row contains 53 sets on a 1.20 m module pitch, giving a cage run of 53 × 1.20 m = 63.60 m. Across the 10 m layout width, each cage row measures 1.25 m. The two aisles between rows are 1.565 m wide, and the two wall-side aisles are 1.56 m wide.

The 63.60 m cage run, 3.30 m front equipment allowance, and 1.85 m rear equipment allowance total 68.75 m. The drawing shows two further end sections of 2.65 m and 1.60 m, bringing the total length to 73.00 m. Use these dimensions to check cage positions, equipment connections, and end clearances against the building drawing.

20,000-layer poultry house layout showing three rows of four-tier H-type cages and space for automatic feeding, egg collection, and manure removal
Longitudinal and cross sections showing cage rows, equipment clearances, and the egg collection side bay.

How do feeding, egg collection, and manure removal fit into the layout?

The front and rear equipment allowances in this 20,000 layers poultry house design provide room for the equipment and connections serving all three cage rows. The final equipment drawing should show the route and connection points for each system.

Automatic Feeding

The drawing shows an external feed silo and an inclined transfer line. The equipment drawing should show where the line enters the house and how feed reaches all three cage rows.

Automatic Egg Collection System

Eggs travel along the cage rows to a cross conveyor. The drawing shows the conveyor extending into the side bay toward the collection point.

Automatic Manure Removal

The system carries manure from the cages to a discharge point. The equipment drawing should show the outlet and the space needed for the receiving equipment or container.

How does rated cage capacity compare with the target flock?

At 144 hens per set, one row of 53 sets has a rated capacity of 7,632 hens. Three rows provide a combined rated capacity of 22,896 hens. This 20,000 layers poultry house design has a target flock of 20,000 laying hens. The final stocking plan should confirm how the birds will be distributed across the three rows based on the cage configuration and applicable local requirements.

What should buyers confirm before requesting a quotation?

Share the house drawing, the 20,000-hen target, and your preferred level of automation. Ask for a dimensioned layout and an itemized quotation covering the cages, feeding system, egg conveyors, and manure removal equipment. Check the proposed layout against the actual clear width and height, column positions, door openings, egg collection point, and manure outlet.

Frequently Asked Questions

Is the 10 m width the internal layout width or the building axis width?

The 10.00 m dimension is the internal layout width used for the three cage rows and four aisles. The cross section shows 10.24 m between the main house axes. For equipment planning, confirm the clear distance between finished walls and any projecting columns.

Is the egg collection side bay included in the 10 m width?

The side bay is shown as an additional 8.00 m span in the cross section. The 10.00 m width refers to the main cage area. The cross conveyor extends from the cage area into the side bay toward the egg collection point.

Can this layout be adapted for a shorter poultry house?

A shorter house may require fewer cage sets per row or a different arrangement. Recalculate the set count after allowing space for the front and rear equipment, and check whether the revised layout still supports the 20,000-hen target.

Are the front and rear equipment allowances fixed?

The 3.30 m front and 1.85 m rear allowances apply to this drawing. For another house, check the required space against the selected feeding equipment, conveyor connections, manure outlet, and access for servicing.

Plan Your 20,000-Hen Poultry House

Need a 20,000 layers poultry house design for your site? Send LIVI Machinery your house dimensions or drawings to request a cage layout and equipment quotation.


Contact Us to Start Your Chicken Farm Now

Livi provide professional, economical, and practical chicken farm solutions for free & high-quality chicken cages 100% factory price. Get Price Now!
Contact us today!

*
*
*
*
WhatsApp
*

Comment